森科五金(深圳)有限公司:真空等离子硬化技术(PHT®)
1:低温离子渗碳处理(PHT.C):适用于奥氏体不锈钢(316、316L、304、1.4571等);双相不锈钢(2205、2507等);镍基及钴铬合金。
2:低温离子渗氮处理(PHT.N):适用于沉淀硬化不锈钢(630、17-4、13-8等);铁素体不锈钢(430等)及马氏体不锈钢。
真空等离子硬化处理(PHT),是大量碳/或氮低温扩散至金属基材的表层形成10-40μm硬化层。通过我司特有的处理方式,可保证不生成铬的化合物沉淀,从而使硬化层坚韧而耐腐蚀。如奥氏体不锈钢零件经PHT处理后机械性能显著增强,零件表面硬度、抗磨损性能、强度及延展性,有数倍或数十倍的提高。
1.表面硬度提高至900-1300HV0.1;硬化层10-40μm(具体硬度和厚度视基材而定);
2.呈单一S相,不改变奥氏体不锈钢无磁或弱磁特性、耐腐蚀性极佳(处理后316L不锈钢,耐中性盐雾试验可大于1000小时);
3.处理后呈零部件本色、白亮光滑,零件尺寸稳定性好变形小;
4.基于表面扩散处理工艺,硬化表层无脱落分层风险,优于镀膜及涂层技术;
5.可对零件进行局部硬化处理;
6.可抗滑动、耐磨蚀及空蚀等(如表面有高强度耐磨损的服役环境);
7.不含六价Cr等RoHS指令禁止的元素,适用于医疗及食品工业。
经PHT处理的零件具有表面坚韧、耐磨损、抗腐蚀、抗划伤的特性;可广泛用于流体泵、阀及接头、汽车配件、紧固件、钟表、食品、制药设备配件及不锈钢消费品。
装饰膜:Decorative coating
可在钢、铜、钛、钨钢等材质的工件上电镀各种颜色的膜层
Various color series on steel,brass,titanium,or tungsten steel substrate.
1、金色膜系 Gold color series
◆真空离子镀金,可镀制1N14、2N18色,厚度可达到1.3MIC以上。
◆IP gold in 1N14,2N18,thickness 0.2~1.3 micron+.
◆真空离子镀4N色和5N色玫瑰金。
◆IP rose gold in 4N and 5N.
◆通过耐磨、耐腐蚀等测试且符合RoHS标准
◆Comply with the requirements of abrasion tests, corrosion tests and RoHS standards.
2、黑色膜系 Black color series
◆枪色、钛灰色、纯黑色等。
◆Gunmetal,grey,black and so on.
◆通过耐磨、人工汗等测试。
◆Comply with the requirements of abrasion tests and artificial sweat tests.
◆类金刚石膜,厚度可达1.3MIC以上。
◆DLC coating,thickness 0.7~1.3 micron+.
◆复合不同的膜层,其硬度可增加几倍。
◆With multi-layer coating the hardness of work-piece can increase over three times.
3、特殊色系 Special color series
◆IP紫色、IP蓝色、IP棕色、IP红色、香槟色。
◆IP purple,IP blue,IP brown,IP red,IP champagne.
4、真空离子镀不锈钢系列 IP Stainless-steel series
◆适合铜合金和锌铝合金材质的镀膜加工。
◆IPS coating is applicable on work-pieces of brass alloy,and zinc-aluminum alloy material.
◆IPS+IPPt(离子钢加白金)、IPS+IPPd(离子钢加钯)具有特白首饰性效果。
◆IPS+IP Pt and IPS+IP Pd coatings enable work-pieces with whiter and glossier jewelry look.
◆IPSC即碳化不锈钢,色泽近不锈钢色,其硬度比IPS硬好几倍。
◆IPSC (IP Stainless-steel carbonized) coating looks like stainless-steel,but it is several times harder than IPS.
5、纳米透明膜系 Nano transparent coating
◆膜层厚度为10~200纳米,技术成熟,可防指纹。
◆Coating thickness ranges from 10 to 200 nanometer. It is fingerprint resistant. |
|
高新技术产品:New high-tech coating
1、复合膜层
复合膜层:复合膜层是指在同一工件上实现两种或两种以上颜色镀膜。多种颜色搭配把工件装饰得更加时尚靓丽,绚丽多彩。森科公司成功研发出真空油工艺,实现在同一工件上电镀两种或两种以上颜色的多色膜层。这种免脱退工艺是森科公司的特色技术。
Multi-Color Coating
Plating two or more colors on a single work piece. Tritree has developed a vacuum oil masking method, for producing these coatings, including a proprietary de-pigmenting process.
2、IP硬膜
◆颜色为钢色,厚度可达1.5μm左右。
◆适用于在钢、钛、钨钢、合金、陶瓷、铜和银等材质上电镀。
◆维氏硬度较高,属于功能膜。
◆镀层致密性好、均匀,耐磨损、产品表面不易刮花。
◆应用于模具、刀具、钟表和手机片等五金件真空镀膜。
◆符合RoHS,REACH等环保标准要求。
IPH Coating
◆Steel color, thickness around 1.5μm.
◆Suitable for steel, titanium, tungsten steel, alloy, ceramics, copper and silver material.
◆High hardness, functional coating.
◆Compact, even application, good abrasion-resistance and scratch resistance.
◆Applications include moulds, cutting bits, watches and cellphone cases.
◆Comply with RoHS and REACH environmental standards.
3、类金刚石膜
◆颜色为灰色和黑色,厚度达1.3μm以上。
◆适用于钢、钛、钨钢等金属材料的镀膜。
◆膜层硬度高,可增长工件使用寿命。
◆镀层均匀、耐腐蚀、耐磨损、致密性和附着力好。
◆磨擦系数低,可提高工件表面光洁度。
◆应用于模具、刀具、钟表和手机片等五金件真空镀膜。
◆符合RoHS,REACH等环保标准要求。
DLC Coating (Diamond Like Carbon)
◆Grey and black color,thickness above 1.3μm.
◆Suitable for steel, titanium and tungsten steel material.
◆High hardness, prolongs the service life of the work-piece.
◆Evenness, good corrosion-resistance,abrasion-resistance, good compactness and adhesion.
◆Low friction coefficient, enhances the degree of finish.
◆Applications for various hardware accessories: moulds, cutting bits, watches and Cell phone cases .
◆Comply with RoHS and REACH environmental standards. |